Inscrivez-vous 01 49 36 46 20
appel-offre
appel-offre
 
            
Date de publication : 06/04/2020
Date de péremption :
Type de procédure : Procédure concurrentielle avec négociation
Type de document : Avis d'attribution
DANEMARK
appel-offre

Danemark-Kongens Lyngby: Enregistreurs à faisceaux d'électrons

2020/S 68-161311  (Source TED)
 
 
V  E  R  S  I  O  N      F  R  A  N  C  A  I  S  E
TX:
06/04/2020 S68 Fournitures - Avis d'attribution de marché - Procédure concurrentielle avec négociation Danemark-Kongens Lyngby: Enregistreurs à faisceaux d'électrons 2020/S 068-161311 Avis d'attribution de marché Résultats de la procédure de marché Fournitures
 
 
Section I: Pouvoir adjudicateur
I.1) Nom et adresses Nom officiel: Danmarks Tekniske Universitet, DTU Numéro national d'identification: 30060946 Adresse postale: Anker Engelunds Vej 1 Ville: Kongens Lyngby Code NUTS: DK02 Code postal: 2800 Pays: Danemark Point(s) de contact: Katrine Freiesleben Petersen Courriel: kafre@dtu.dk Téléphone: +45 45252525 Adresse(s) internet: Adresse principale: http://www.dtu.dk Adresse du profil d'acheteur: https://eu.eu-supply.com/ctm/Company/CompanyInformation/Index/165863 http://www.dtu.dk https://eu.eu-supply.com/ctm/Company/CompanyInformation/Index/165863
I.2) Informations sur la passation conjointe de marchés
I.4) Type de pouvoir adjudicateur Organisme de droit public
I.5) Activité principale Éducation
 
 
Section II: Objet
II.1) Étendue du marché
II.1.1) Intitulé:
Direct electron detection camera
II.1.2) Code CPV principal 38341100
II.1.3) Type de marché Fournitures
II.1.4) Description succincte:
Upgrade of Titan ETEM GIF system with K3 Base IS direct electron detection camera.
II.1.6) Information sur les lots Ce marché est divisé en lots: non
II.1.7) Valeur totale du marché (hors TVA) Valeur hors TVA: 1 920 467.00 EUR
II.2) Description
II.2.1) Intitulé:
II.2.2) Code(s) CPV additionnel(s) 38433000 38651000
II.2.3) Lieu d'exécution Code NUTS: DK02
II.2.4) Description des prestations:
The Center for Visualizing Catalytic Processes (VISION), a center of excellence funded by DNRF (Danish National Research Foundation), wants to buy a camera to upgrade an existing instrument, an aberration-corrected Titan environmental transmission electron microscopy (ETEM) delivered by Thermo Fisher Scientific. The microscope is located at the premises of Haldor Topsoe A/S, and VISION is granted access according to a collaboration agreement between DTU Physics and Haldor Topsoe A/S. The camera has be a most sensitive detector for atomic-resolution transmission electron microscopy (TEM) measurements in order to suppress beam-induced sample alterations in the best possible way. The camera should be able to deliver images at 1Å resolution at low electron beam currents (< 10-20 e/(Å2s)) and low electron doses (< 10-20 e/(Å2)). Currently, the most sensitive detectors available are Direct Electron Detection (DED) cameras operated in single electron counting modes. The camera sensitivity expressed by its detection quantum efficiency (DQE) must be as high as possible reaching at a minimum > 50 % at ½ Nyquist and > 80 % at 0 Nyquist for 300 keV electrons. Moreover, as VISION aims for imaging dynamics of single nanoparticles in operando during catalysis, the DED also must provide a real-time single electron counting mode with online real-time data processing/acquisition for dose-fractionated imaging, focal series acquisition and drift correction. The time-resolution has therefore to be as good as possible and the full sensor readout speed has to be as high as possible reaching at a minimum > 1000 frames per second (corresponding to > 10 millions pixels). Furthermore, VISION's core scientific goal is to relate atomic structure, dynamics and functions of single nanoparticles. The camera will therefore have to be interfaced with a detector system to enable both tuning the microscope's aberration-corrector for atomic-resolution TEM imaging of nanoparticles and simultaneous electron energy loss spectroscopy (EELS) of their catalytic functions. Such a detector system is available on the Topsoe Titan ETEM. It consists of a Gatan Image Filter (GIF) spectrometer for EELS with a post-GIF charged-coupled device (CCD) detector and a pre-GIF CCD camera that is radiation-hard for tuning the microscopes aberration-corrector. The camera must successfully pass the following site-acceptance test: (1) Mounting on-axis and pre-GIF position; (2) Demonstrate tuning the aberration-corrector to (i) enable an isotrope information transfer for spatial frequencies up to 1Å-1 at 300 keV and (ii) imaging at 1Å resolution in TEM mode, both tasks executed on the existing on-axis and pre-GIF charged-coupled device (CCD) camera. These specifications corresponds to the current performance of the microscope; (3) Demonstrate 1Å resolution on DED camera at 300keV and ca. 1s exposure with 10 e/Å^2/s in high vacuum mode of a Au/C cross-grating using electron counting mode; (4) Demonstrate focal image series acquisition and magnification readout; (5) Demonstrate EELS with zero-loss peak having a full-width half-maximum of 1eV at 300 keV, as on existing post-GIF CCD camera; (6) X-ray safety specs for Titan ETEM are maintained after mounting.
II.2.5) Critères d'attribution Prix
II.2.11) Information sur les options Options: oui Description des options:
K3 sensor replacement. Upgrade K3 Base IS to K3 IS. Upgrades existing K3Base IS camera (from 14.2 to 23.6 megapixels). Removal of K3-IS and re-establishing the original state of the old Topsoe Titan including x3 voltage alignments. This assumes all old hardware is retained and stored when the K3 is installed later this year. Relocation of K3-IS to a new TEM. The options reflect that the microscope configuration is unspecified and it is understood that the prices are only guiding at the date of the PO. They could include, but not limited to the following: your quote really needs to say in big red letters "non binding estimate".
   1.  Naked TEM to receive camera a. 1026.T installation; b. Air, water, shutter kit; c. Flange and house zero if FEI/Thermo; d. Thermo charges for shutter access, scripting adaptor, etc. GIF Continuum ER System to mount to new Thermo microscope. Also attached options for HAADF, EDS, STEMx: - option for EDS, - option for STEMx, - option for HAADF.
II.2.13) Information sur les fonds de l'Union européenne
Le contrat s'inscrit dans un projet/programme financé par des fonds de l'Union européenne: non
II.2.14) Informations complémentaires The value of the contract has raised because of the options. The content of the procurement has not changed.
 
 
Section IV: Procédure
IV.1) Description
IV.1.1) Type de procédure Procédure concurrentielle avec négociation
IV.1.3) Information sur l'accord-cadre ou le système d'acquisition dynamique
IV.1.6) Enchère électronique
IV.1.8) Information concernant l'accord sur les marchés publics (AMP)
Le marché est couvert par l'accord sur les marchés publics: oui
IV.2) Renseignements d'ordre administratif
IV.2.1) Publication antérieure relative à la présente procédure Numéro de l'avis au JO série S: 2020/S 038-089933
IV.2.8) Informations sur l'abandon du système d'acquisition dynamique
IV.2.9) Informations sur l'abandon de la procédure d'appel à la concurrence sous la forme d'un avis de préinformation
 
 
Section V: Attribution du marché
Marché nº: 1 Intitulé:
K3 Base IS - Direct electron detection camera
Un marché/lot est attribué: oui
V.2) Attribution du marché
V.2.1) Date de conclusion du marché:
31/03/2020
V.2.2) Informations sur les offres Nombre d'offres reçues: 1
Le marché a été attribué à un groupement d'opérateurs économiques: non
V.2.3) Nom et adresse du titulaire Nom officiel: BlueScientific Limited Ville: Cambridge Code NUTS: UK Pays: Royaume-Uni
Le titulaire est une PME: oui
V.2.4) Informations sur le montant du marché/du lot (hors TVA) Valeur totale du marché/du lot: 1 920 467.00 EUR
V.2.5) Information sur la sous-traitance
Le marché est susceptible d'être sous-traité
 
 
Section VI: Renseignements complémentaires
VI.3) Informations complémentaires:
VI.4) Procédures de recours
VI.4.1) Instance chargée des procédures de recours Nom officiel: Klagenævnet for Udbud Adresse postale: Nævnenes hus, Toldboden 2 Ville: Viborg Code postal: 8800 Pays: Danemark Courriel: klfu@erst.dk Téléphone: +45 35291000 Adresse internet: http://www.klfu.dk http://www.klfu.dk
VI.4.2) Organe chargé des procédures de médiation
VI.4.3) Introduction de recours Précisions concernant les délais d'introduction de recours:
Complaint regarding the award of contract: Complaint regarding the award of contract must be submitted no later than 45 calendar days from the date after the contracting authority has published a contract award notice in the European Union Official Journal informing that the contracting authority has awarded the contract, cf. lov om Klagenævnet for Udbud § 7, Section 2, No.
   1.  Complaint regarding direct award of contract: Complaint regarding the contracting authority's award of contract without prior publication of a contract notice in the European Union Official Journal must be submitted no later than 30 calendar days from the date after a contract award notice has been published by the contracting authority in the European Union Official Journal and that contract award notice includes the grounds for the decision to award the contract directly, cf. lov om Klagenævnet for Udbud § 7, Section
   3. 
VI.4.4) Service auprès duquel des renseignements peuvent être obtenus sur l'introduction de recours Nom officiel: Konkurrence- og Forbrugerstyrelsen Adresse postale: Carl Jacobsens Vej 35 Ville: Valby Code postal: 2500 Pays: Danemark Courriel: kfst@kfst.dk Téléphone: +45 41715000 Adresse internet: http://www.kfst.dk http://www.kfst.dk
VI.5) Date d'envoi du présent avis:
02/04/2020
 
 
C L A S S E    C P V
38341100 - Enregistreurs à faisceaux d'électrons 
38433000 - Spectromètres 
38651000 - Appareils photographiques